Pin2DMD LED Display frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a frame to mount two P2.5 64x32 led video panels side by side for use in a pinball machine. The first layer is…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 43
- Makes
- 0
- Views
- 374
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a frame to mount two P2.5 64x32 led video panels side by side for use in a pinball machine. The first layer is solid because I had better bed adhesion when the print head wasn't skipping around to layout the holes. The openings are easily cut out with an x-acto knife after printing. The center mounting hole is modeled to take an 8/32 nut and screw so if there is any flex in the panel when mounted it can be leveled out.
I used this to build a pin2dmd color display: www.pin2dmd.com
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20
Filament: solutech3d pla black
Category: Electronics