South Park Pinball Warning Sign Surround
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a surround I printed so that I could back light the warning sign topper on my South Park pinball machine. I…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 729
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a surround I printed so that I could back light the warning sign topper on my South Park pinball machine. I used #4 sheet metal screws to secure the sign to the mounting posts. On two of the posts the screw was a bit tight and I had to clear it with a drill bit first. If you paint the screws black they blend right in. The lights are 12v RGB strips with a controller I had lying around but strait white would look good too.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20
Category: Other