South Park Pinball Warning Sign Surround
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a surround I printed so that I could back light the warning sign topper on my South Park pinball machine. I…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 37
- Makes
- 0
- Views
- 729
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is a surround I printed so that I could back light the warning sign topper on my South Park pinball machine. I used #4 sheet metal screws to secure the sign to the mounting posts. On two of the posts the screw was a bit tight and I had to clear it with a drill bit first. If you paint the screws black they blend right in. The lights are 12v RGB strips with a controller I had lying around but strait white would look good too.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20
Category: Other