1 / 4
Sennheiser to Bose ear pad modifier reducer shim
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows fitment of Bose headphone ear pads to Sennheiser headphones
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Allows fitment of Bose headphone ear pads to Sennheiser headphones.
(Tested with Sennheider HD206 and Bose QC15 headphones only - YMMV.)
I bought some basic Sennheiser headphones (HD206) and found the ear pads thin and uncomfortable. As I had better ear pads available from a broken pair of Bose QC15s, I modelled this reducer to allwo the Bose ear pads to fit.
A couple of notes:
- The outer ring is a very tight fit in the Sennheisers, so care is needed to not damage the retaining tabs in the earphones. I found that is it best to fit the ring behind the top/bottom tabs plus one side (left or right, your call) first, then to carefully fit the remaining side last.
- I only modelled four retaining tabs on the inside of the ring to hold the Bose ear pads; while this is fewer than the eight found on the original Bose headphones, it seems to work fine.