1 / 4
Sennheiser to Bose ear pad modifier reducer shim
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows fitment of Bose headphone ear pads to Sennheiser headphones
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 391
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
Allows fitment of Bose headphone ear pads to Sennheiser headphones.
(Tested with Sennheider HD206 and Bose QC15 headphones only - YMMV.)
I bought some basic Sennheiser headphones (HD206) and found the ear pads thin and uncomfortable. As I had better ear pads available from a broken pair of Bose QC15s, I modelled this reducer to allwo the Bose ear pads to fit.
A couple of notes:
- The outer ring is a very tight fit in the Sennheisers, so care is needed to not damage the retaining tabs in the earphones. I found that is it best to fit the ring behind the top/bottom tabs plus one side (left or right, your call) first, then to carefully fit the remaining side last.
- I only modelled four retaining tabs on the inside of the ring to hold the Bose ear pads; while this is fewer than the eight found on the original Bose headphones, it seems to work fine.