LayersFactory
Zgłoś model
1 / 3
Parametric Tape Dispenser (Autodesk Fusion) — zdjęcie 1
1 / 3

Parametric Tape Dispenser (Autodesk Fusion)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

megalog_

megalog_

@megalog_

This Parametric Tape Dispenser can be customized in under 1 minute.

Ocena
5 / 5
Polubienia
13
Pobrania
75
Wydruki
1
Wyświetlenia
641
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (19)Powiązane

stl. for a roll of tape with the dimensions

  • inner diameter: 26 mm
  • outer diameter: 43 mm
  • thickness: 16 mm

Parametric Gravity Tape Dispenser

What is parametric design?

In parametric design, parameters are defined. These can be changed very easily afterwards. For example, personalized models are very easy to create.

Instruction  :

Only 4 steps.
The Fusion 360 program is required for customization. (It is free for hobby users and students).
 
  1. Open the .f3d file in Fusion. Then go to SOLID > MODIFY > Change Parameters > (a table should open)

    2.  Three parameters must be changed. 

  • edge_length = tape outer diameter 
  • inner_diameter = tape inner diameter  
  • body_height = tape thickness

Attention: Adjust only the values marked in yellow here, the values behind them must remain as they are. 

    3. Select the Chamfer tool:  

     

    3.1 Select all the edges (as highlighted here). 

    

   3.2 Enter traingle_chamfer as the value.

    

   4. Export both parts one by one, always turn one off: 

   

 

Super that was everything. 

 

Printing Instructions: 

Turn all parts to the large side in the slicer. 

Settings:

layer height: 0.3 mm (or better)

filament: PLA/PETG 

nozzle: 0.4 mm (recommendation)

 

Thank you, for any problems or questions. 
Write to me.

Tagi

parametrictapetapeholdergravitytapedispenser