Proxxon KS 230 Table Saw Sled And Stop Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Preciser and repeatable cuts
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 318
- Wydruki
- 0
- Wyświetlenia
- 2060
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Fully 3D printed table saw sled for the mini Proxxon KS 230.
- Parts:
- Sled
- Runner
- Guide
- Nut
- Railnut
- Lever
- Stop
- Fasteners (not 3D printed :-)
- 1x M3x20 socket head (fully threaded)
- 1x M4x25 socket head
- 2x M3 hex nut
- 1x M4 hex locknut
The tolerances are tight, but it should work alright with PLA.
The runner and guide should be printed with variable layer heights or 0.1 mm for accuracy.
All other parts can be printed quickly with 0.3 mm layer height.
All holes are pre-bridged. No supports needed.
The sled's rail, the runner and the guide need some fine sanding for better gliding.
Glueing:
Use CA glue and precise squares to align the sled to the aluminium table.
It's not highly accurate – but way better than the original mitre.
Repeatable cuts are easy now :-)
Have a look at this stop for repeatable cuts using the originale mitre:
https://www.printables.com/model/518855-proxxon-ks-230-stop
