Spacetime curvature/ Curvatura de l'espai-temps (UPDATED)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Representation of the curvature of spacetime with Einstein's field equation.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 101
- Wydruki
- 1
- Wyświetlenia
- 625
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
English
UPDATE:
Updated stl of the space-time curvature models. In this update I have slightly modified 1/2 of the equation and made some subtle changes to the surface curvature.
I include the 3mf file with the settings for the MK3.5S (valid for both models). With a metallic filament (Prusament Galaxy Silver, for example) and a slight fuzzy skin the result is amazing.
PrusaSlicer Settings:
Fuzzy_skin_thickness: 0.08 mm
Fuzzy_skin_point_dist: 0.6 mm
INITIAL MODEL:
Representation of the curvature of spacetime with Einstein's field equation.
The initial idea was to make a paperweight for the worktable, but it ended up being an irresistible toy. https://twitter.com/jgil65/status/1675898899565797376
I leave you two versions of 120x120mm and 160x160mm.
It is important to print the model with as small a layer height as possible to improve the resulting surface.
0.12 mm layer height gives a very acceptable result. The printing time is very long, but you know that spacetime is relative.
A 15% infill will also give you a good result, with a pattern of triangles.
For other settings, see the .3mf files.
I recommend that you look for balls while you print.
Català
ACTUALITZACIÓ:
Actualitzats els stl dels models de curvatura de l'espai-temps. En aquesta actualització he modificat lleugerament l'1/2 de l'equació i he fet uns canvis subtils en la curvatura de la superfície.
Incloc el fitxer 3mf amb la configuració per a la MK3.5S (vàlida pels dos models). Amb un filament metàl·lic (prusament Galaxy Silver, per exemple) i una lleugera pell difusa el resultat és sorprenent.
Configuració del Prusaslicer:
Fuzzy_skin_thickness: 0,08 mm
Fuzzy_skin_point_dist: 0,6 mm
MODEL INICIAL:
Representació de la curvatura de l’espai-temps amb l’equació de camp d’Einstein
La idea inicial va ser fer un petjapapers per a la taula de treball, però ha acabat sent una joguina irresistible. https://twitter.com/jgil65/status/1675209794779578369
Us deixo dues versions de 120x120mm i 160x160mm.
És important imprimir el model amb una altura de capa el més petita possible per a millorar la superfície resultant.
0,12 mm dona un resultat molt acceptable. El temps d’impressió s’allarga molt, però ja sabeu que l’espai temps es relatiu.
També us donarà un bon resultat un infill del 15% amb un patró de triangles.
Per a la resta de configuració, mireu els fitxers .3mf
Us recomano que aneu buscant boletes mentre feu la impressió