1 / 3
Micro Fidget Cube — zdjęcie 1
1 / 3

Micro Fidget Cube

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The smallest 3D printable fidget cube.

Ocena
4,933 / 5
Polubienia
133
Pobrania
1557
Wydruki
19
Wyświetlenia
3328
Oceny
15

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Print in place with no supports, raft or brim.

This cube is designed for 0.2mm layers, 0.4mm nozzle. 

Set the infill to 20-25%. If the print is fused, set flow to 90%.

4 top and bottom layers is sufficient.

1st layer adhesion is crucial obviously but more so on this print! Keep an eye on the first few layers.

Some of the joints may need gently liberated - once they're loose they will loosen up with use.