1 / 3
Micro Fidget Cube
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The smallest 3D printable fidget cube.
- Rating
- 4.933 / 5
- Likes
- 133
- Downloads
- 1,557
- Makes
- 19
- Views
- 3,328
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial
Print in place with no supports, raft or brim.
This cube is designed for 0.2mm layers, 0.4mm nozzle.
Set the infill to 20-25%. If the print is fused, set flow to 90%.
4 top and bottom layers is sufficient.
1st layer adhesion is crucial obviously but more so on this print! Keep an eye on the first few layers.
Some of the joints may need gently liberated - once they're loose they will loosen up with use.