1 / 6
Magnetic Filament Clip and Name Tag Colour Management Solution — zdjęcie 1
1 / 6

Magnetic Filament Clip and Name Tag Colour Management Solution

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Combined Filament Clip and Name/Id tag. With holder for tags on BambuLab AMS and Prusa MK3s

Ocena
5 / 5
Polubienia
17
Pobrania
63
Wydruki
1
Wyświetlenia
766
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Update 18/12/23 Added flat version - with and without text in Bambu Studio 3mf file and separate STL file

 

 

 

Designed this filament clip to help handle the many different colours and types of filament you start to accumulate once you start multi colour printing - with either a Bambu Lab AMS, MMU or Palette.

Consists of a clip to retain filament, that also contains space for a printed label and magnetic holders for the filament clip for when the filament is loaded in the printer

A small insert is also provided to stop the printed labels falling off when using filament that is hard for the printed labels to stick to.

Custom holders then provided for a BambuLab AMS and Prusa MK3s

 

Designed for 5mm magnets and nimbot type label printer.

As tags are printed in actual filament then they can be scanned in to get reasonably accurate colours - 

Can then in the case of a Mac be used to create a custom colour palette that is then configured within Fusion 360 and Bambu Studio to help with correct AMS colour selection.

 

Suggest magnets are inserted using a bench vice or other tool.

Example Sources of Magnets

Magnets 5x2.5 mm Neodymium.    7.5p each

https://www.ebay.co.uk/itm/161590568131

Magnets 5 x 3  10p each

https://www.amazon.co.uk/FINDMAG-Fridge-Magnets-Strong-Whiteboard/dp/B0BTLPTRSG

Label Maker

https://www.amazon.co.uk/NIIMBOT-D110-Technology-Rechargeable-Organization/dp/B09CM7Q3F7

Label Size. - 40 x 2

 

Remix of Thinner42 thingeverse remix

https://www.printables.com/model/79519-scad-filament-clip/remixes

 

 

PS/ Have tried using QR codes to maybe automate the filament config onto Bambu Studio - however have not found software that will read multiple QR codes from one photo - so now pursuing just doing an OCR based analysis of a filament labelled AMS - to see if it would be possible to automatically configure the non RFID filament colours via automation of Bambu Studio.

 

 

Tagi