Snapmaker 2.0 A350 Spoolholders for 300mm and 200mm Spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
additional spool holders for Snapmaker 2.0 A350 Enclosure 1x up to 300mm 1x for smaller spools
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 489
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
additional spool holders for Snapmaker A350 Enclosure
1x up to 300mm spools - left overhead frame mounting
1x for smaller spools - rear left below frame mounting
you need per holder 1 threaded rod M8, 115mm length and 2 M8 nuts, M4x16 cylinder head screws
i use the holders with the following additional parts.
https://www.printables.com/de/model/222371-spring-loaded-filament-spool-hub-for-snapmaker-20
https://www.printables.com/de/model/334088-star-grip-sterngriff-m3-m4-m5-m6-m8-m10
many thanks to the designers!
note that for the 300 mm spoolholder mounting an additional M4 thread should be cut in the frame.
an enclosure screw also has to be shortened (from M4x20 to M4x14) on the outside. (see photo)
print the parts stable enough to carry the weight of the full spools.
depending on your printer calibration it may be necessary to scale the parts minimally.