1 / 8
Snapmaker 2.0 A350 Spoolholders for 300mm and 200mm Spools — image 1
1 / 8

Snapmaker 2.0 A350 Spoolholders for 300mm and 200mm Spools

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

additional spool holders for Snapmaker 2.0 A350 Enclosure 1x up to 300mm 1x for smaller spools

Rating
0 / 5
Likes
5
Downloads
60
Makes
0
Views
489
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

additional spool holders for Snapmaker A350 Enclosure

1x up to 300mm spools - left  overhead frame mounting

1x for smaller spools - rear left below frame mounting 

 

you need per holder 1 threaded rod M8, 115mm length and 2 M8 nuts, M4x16 cylinder head screws

 

i use the holders with the following additional parts.

https://www.printables.com/de/model/222371-spring-loaded-filament-spool-hub-for-snapmaker-20

https://www.printables.com/de/model/334088-star-grip-sterngriff-m3-m4-m5-m6-m8-m10

many thanks to the designers!

 

note that for the 300 mm spoolholder mounting an additional M4 thread should be cut in the frame. 

an enclosure screw also has to be shortened (from M4x20 to M4x14) on the outside. (see photo)

print the parts stable enough to carry the weight of the full spools.

depending on your printer calibration it may be necessary to scale the parts minimally.