Geocache Preform Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mechanism releases a bottle preform in an electronic gadget cache.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 922
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This mechanism releases a bottle preform in an electronic gadget cache. It uses an a 9g servo (SG9) and 4 screws 3.5* 16 mm.
The box can be glued to the mount. And this can be glued into the birdhouse. Super glue (cyanoacrylate) works very well for PLA. Epoxy should work also.
The spring is derived from “Accordion folded customizable spring”.
https://www.thingiverse.com/thing:980377
Accordion Length 52
Accordion Folds 20
Accordion Width 11
Accordion Height 11
Accordion Sheet Thickness 0.5
Accordion Right Angle Ends: To both sides
Reinforcement For Ends: No
1-hole
Hole 1: Circle
Hole 1 Diameter 8
Hole 1 Rotate 45
Hole 1 X Position 0
Hole 1 Y Position 0
Video:
“Behind the Cache” made a birdhouse using this mechanism.
Print instructions
Category: Toy & Game Accessories Summary
This mechanism releases a bottle preform in an electronic gadget cache. It uses an a 9g servo (SG9) and 4 screws 3.5* 16 mm.
The box can be glued to the mount. And this can be glued into the birdhouse. Super glue (cyanoacrylate) works very well for PLA. Epoxy should work also.
The spring is derived from “Accordion folded customizable spring”.
https://www.thingiverse.com/thing:980377
Accordion Length 52
Accordion Folds 20
Accordion Width 11
Accordion Height 11
Accordion Sheet Thickness 0.5
Accordion Right Angle Ends: To both sides
Reinforcement For Ends: No
1-hole
Hole 1: Circle
Hole 1 Diameter 8
Hole 1 Rotate 45
Hole 1 X Position 0
Hole 1 Y Position 0
Video:
“Behind the Cache” made a birdhouse using this mechanism.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
</div>Rafts:No
Supports:
No
</div>Resolution:0.2
Filament: any PLA