1 / 10
Belt Organizer Hanger (6 or 8 belts)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully printable belt organizer. Mix and match the 6 and 8 belt base with the small or large hook.
- Ocena
- 5 / 5
- Polubienia
- 264
- Pobrania
- 1301
- Wydruki
- 9
- Wyświetlenia
- 4212
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 9) (Komentarze: 10)Remiksy (1)Kolekcje (400)Powiązane
Fits a variety of belts: thin, thick, D-ring. Have not tried: double prong or knob buckles.
Easy to print, no supports needed, no glue or other tools needed to assemble. Slide the hook through the base, and it'll hold with friction and gravity.
Face the belts toward the center to keep the prong tidy.
This is an improved version of my original design that failed on layer separation on the hook. Separated the hook to print in a stronger orientation.