1 / 2
Tape dispenser for mounting on the side of a cabinet. — zdjęcie 1
1 / 2

Tape dispenser for mounting on the side of a cabinet.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I found the "tape dispenser - side mounted" by boko not to be to my liking, so I designed my own in freeCAD.

Ocena
5 / 5
Polubienia
12
Pobrania
48
Wydruki
0
Wyświetlenia
304
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

In my workshop, I was using a pegboard-mounted rod to hang my tapes on and wanted something better.  I saw and tried "tape dispenser - side mounted" by book (https://www.printables.com/model/514012-tape-dispenser-side-mounted) but found it to be lacking for my needs, so I designed this along the same general lines but with no moving parts (except a lid for the hub for keeping the tape roll on the hub and storing additional cutters).  It is simple to print in PLA using a 0.4 nozzle at 0.3 layer height without supports and I am providing the FreeCAD file so you can change it to match your situation, tape, etc.  The mounting holes are for #8 flathead wood screws and an M3 screw (8mm) and nut hold the cutter in place.

Tagi