Tape dispenser for mounting on the side of a cabinet.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I found the "tape dispenser - side mounted" by boko not to be to my liking, so I designed my own in freeCAD.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 48
- Makes
- 0
- Views
- 304
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
In my workshop, I was using a pegboard-mounted rod to hang my tapes on and wanted something better. I saw and tried "tape dispenser - side mounted" by book (https://www.printables.com/model/514012-tape-dispenser-side-mounted) but found it to be lacking for my needs, so I designed this along the same general lines but with no moving parts (except a lid for the hub for keeping the tape roll on the hub and storing additional cutters). It is simple to print in PLA using a 0.4 nozzle at 0.3 layer height without supports and I am providing the FreeCAD file so you can change it to match your situation, tape, etc. The mounting holes are for #8 flathead wood screws and an M3 screw (8mm) and nut hold the cutter in place.