1 / 2
Guide for 1/8" stamping set
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Stamp alignment jig for the 1/8" inch stamping set from Harbor Freight.
The spacing is either wide or narrow. Put the slider on with the ridges away from the flat tab for wide (4 mm) spacing, on the side with the tab for narrow (3 mm). Apply pressure in the direction of the arrows to keep it in place.
It's not perfect, but better than freehand.
The large flat tab is for taping to the work surface.
The center point is marked in the window.
Print on edge for best results, no supports are necessary, but a brim is recommended.