1 / 2
Guide for 1/8" stamping set
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stamping guide for small Harbor Freight Stamping set.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 27
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Stamp alignment jig for the 1/8" inch stamping set from Harbor Freight.
The spacing is either wide or narrow. Put the slider on with the ridges away from the flat tab for wide (4 mm) spacing, on the side with the tab for narrow (3 mm). Apply pressure in the direction of the arrows to keep it in place.
It's not perfect, but better than freehand.
The large flat tab is for taping to the work surface.
The center point is marked in the window.
Print on edge for best results, no supports are necessary, but a brim is recommended.