Wet Palette w/ Brush Holder & Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular and magnetic wet palette with a flip up brush holder and optional brush storage
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 521
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Modular Wet Palette using up to 20 pieces of 6mm x2.5mm magnets.
The palette compartment features a holder to set your brush in and divider options to separate your paints. The whole thing was based on the size of one paper towel sheet folded in half.
The brush compartment is completely optional, to sit under the palette compartment and store your different brushes and tools, there are 2 STLs, one with some dividers to keep them from rolling around, and one for the brushes that are a little longer and need to sit diagonally in the case without dividers in the way.
No supports or brim required. I printed this with PETG with Archimedean chord pattern on top and bottom layers to try to get a better seal. 7% triangular infill to try to speed it up a little, it is a lengthier print.
I've included a test print file to test the fit of the magnets and the lids before committing to the long haul.
Modeled in Tinkercad