PEI Steel Sheet Under Desk Holder, 235mm, Expandable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An under desk mount for print surfaces. Fits sheets 235mmx235mm, up to 2mm thick. Can be easily expanded.
- Ocena
- 4,5 / 5
- Polubienia
- 21
- Pobrania
- 86
- Wydruki
- 3
- Wyświetlenia
- 602
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple under desk mount for 235mmx235mm steel sheets. Can be used singularly or expanded to house as many sheets as needed. Fits a maximum height of 2mm per layer.
The main bracket is mounted with four 3.5mm countersunk screws with the addition of four M3 x 4mm length x 5mm OD threaded inserts, if adding additional sections. The first extension can then be easily mounted with four M3 x 8mm screws and any following layers by increasing the screw length by 6mm.
I have also included a fitting guide, for convenience.