PEI Steel Sheet Under Desk Holder, 235mm, Expandable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An under desk mount for print surfaces. Fits sheets 235mmx235mm, up to 2mm thick. Can be easily expanded.
- Rating
- 4.5 / 5
- Likes
- 21
- Downloads
- 86
- Makes
- 3
- Views
- 602
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
A simple under desk mount for 235mmx235mm steel sheets. Can be used singularly or expanded to house as many sheets as needed. Fits a maximum height of 2mm per layer.
The main bracket is mounted with four 3.5mm countersunk screws with the addition of four M3 x 4mm length x 5mm OD threaded inserts, if adding additional sections. The first extension can then be easily mounted with four M3 x 8mm screws and any following layers by increasing the screw length by 6mm.
I have also included a fitting guide, for convenience.