MPMD Improved Extruder Fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Description This is a side product of my top plate for flexible filament for the MPMD, basically the mk3's mount…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Description
This is a side product of my top plate for flexible filament for the MPMD, basically the mk3's mount solution as a stand-alone.
I have the PTFE tube jump every now and then when printing non-flex filaments with Spconnol's extruder fix integrated and when researching discovered it was originally designed for an inward mount. Reversing the direction of the screw, as well as giving it a bit of straight distance between the points where there is friction held, should make slipping a lot less likely.
Make sure you print the threaded tube standing up on the smaller side, this ensures you don't have any cleanup trouble while keeping maximal structural integrity.
note: I've had excellent results printing the tube part in PETG
Changelog
- mk2: the first iteration would sit a bit loose in the stock extruder plate and some filaments would make it wiggle enough for the ring that was holding it to break off. This new version has a beefed-up ring that will fill out the whole space in the stock extruder plate, thus already wiggling a lot less. It also has a standoff plate, that, when turned towards the printer, will add more stability.
- mk1: initial release
Category: 3D Printer Extruders