1 / 3
AnkerMake M5 5015 Fan for Extruder Heatsink (for Hot Climates) — zdjęcie 1
1 / 3

AnkerMake M5 5015 Fan for Extruder Heatsink (for Hot Climates)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For the homies in hot climates who still want to print.

Ocena
3 / 5
Polubienia
21
Pobrania
78
Wydruki
0
Wyświetlenia
1082
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is for the homies in hot climates. The parts are provided in the intended print orientation and do not need supports. You can use just about any material, these won't see practically any heat. I recommend at least 3mm brim on the duct part for print reliability.

I have tested absolutely nothing about this. Leave me feedback about fit and finish and I'll adjust the models as necessary.

Good luck and I hope this can keep more people printing when it's hot out!

Tagi