saddleheight setup-tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
If you are sensible with your saddle-height on your bicycle you might need a tool to set up your saddleheight. This tool is built with the use of a 1m aluminium-L-shaped rail from the hardware-store. (20*18x1,5mm) The bottom piece is glued in place with superglue.
Usage: Put the pointy piece in your Shimanoe hollowcrank-bottom bracket and slide the top piece onto a defined place on your saddle. measure.
added: The screw is not working with my printing. So I left it out and took 2 layers of tape to make the sliding piece stick a little.
added: glued on a metric metallic tape measure from china
added: mounting-plate to mount it on your wooden Zwift-table
Print Settings
Printer:
MKC Mk2
Rafts:
No
Supports:
Yes
Resolution:
0.4
Infill:
12%
Filament:
Material4Print PLACategory: Sport & Outdoors