saddleheight setup-tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you are sensible with your saddle-height on your bicycle you might need a tool to set up your saddleheight. This…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 32
- Makes
- 0
- Views
- 320
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
If you are sensible with your saddle-height on your bicycle you might need a tool to set up your saddleheight. This tool is built with the use of a 1m aluminium-L-shaped rail from the hardware-store. (20*18x1,5mm) The bottom piece is glued in place with superglue.
Usage: Put the pointy piece in your Shimanoe hollowcrank-bottom bracket and slide the top piece onto a defined place on your saddle. measure.
added: The screw is not working with my printing. So I left it out and took 2 layers of tape to make the sliding piece stick a little.
added: glued on a metric metallic tape measure from china
added: mounting-plate to mount it on your wooden Zwift-table
Print Settings
Printer:
MKC Mk2
Rafts:
No
Supports:
Yes
Resolution:
0.4
Infill:
12%
Filament:
Material4Print PLACategory: Sport & Outdoors