StickVise jaws for holding round objects
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternate jaws for a StickVise that are suitable for holding round circuit boards of a variety of sizes
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
These jaws adapt the StickVise so that it can be used with a variety of round circuit boards.
I've tested this with round boards of 106mm and 50mm. Not recommended for boards of less than 30mm diameter.
Printing notes: no supports should be required. The hole for the screw may be slightly tight. If needed it can be enlarged to final dimension with a 1/8" drill bit, or simply spinning an m3 screw using a screwdriver.
These jaws are compatible with the screws that shipped with the StickVise , m3 socket head cap screws, and m3 risers.