RepWinder Clutch Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created a modified clutch plate for the RepWinder.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 648
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Created a modified clutch plate for the RepWinder.
I was having issues with the clutch slipping too much and releasing all of its tension. This Mod allows for the use of a rubber washer to provide extra friction and allow more tension to be built up in the spring which will not be released when the clutch slips.
The Rubber washers I found on McMaster Carr.
https://www.mcmaster.com/90131A105/
I also recommend bending the tab on the spring back and wrapping some tape around it tightly. I was having issues where the tab would slip through the hole and release the tension. I used Polymide tape because that's what I had in that width. Put a good 3 or 4 wraps of tape around it so it doesn't come loose.
Print instructions
100% Infill