RepWinder Clutch Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Created a modified clutch plate for the RepWinder.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 45
- Makes
- 0
- Views
- 648
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Created a modified clutch plate for the RepWinder.
I was having issues with the clutch slipping too much and releasing all of its tension. This Mod allows for the use of a rubber washer to provide extra friction and allow more tension to be built up in the spring which will not be released when the clutch slips.
The Rubber washers I found on McMaster Carr.
https://www.mcmaster.com/90131A105/
I also recommend bending the tab on the spring back and wrapping some tape around it tightly. I was having issues where the tab would slip through the hole and release the tension. I used Polymide tape because that's what I had in that width. Put a good 3 or 4 wraps of tape around it so it doesn't come loose.
Print instructions
100% Infill