Saab 9-3 Hirsch Performance Cup Holder Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for the cup holder for a Saab 9-3 to snugly fit different can sizes.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 308
- Wydruki
- 0
- Wyświetlenia
- 2575
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Saab 9-3 Hirsch Performance cup holder inserts gives your refreshments the perfect fit while increasing performance by reducing balance-shift in the fast moving corners.
This will decrease your (lap-)time to and from work, and improve your awareness by not having to babysit the soda can in every corner. Made in two sizes, to maximize performance for every scenario.
This upgrade is not yet dynoed, but exact performance numbers will be published as soon as I get the car running.
Printed with organic supports and a 35° overhang threshold. 0.3mm worked fine, if you need it quick and dirty. The bottom layer will be the one showing once fitted in the car. To remove the supports in the slots, I used a small carving knife to cut the top and bottom of the supports. Then using some pliers to pull the excess material out.