Japanese Yosakoi Naruko Clapper Instrument
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print and assemble your own naruko for Japanese odori.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 727
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Print and assemble your own naruko for Japanese odori. Supports needed only for red end block indents. Vertical version of handle also available for support-less prints.
After printing one of each file (per clapper) assemble as follows:
1) Use solid wire and thread through black and yellow pieces, with one red block on each end. I use heavy duty paper clips straightened with a pair of pliers. The wire should pass through halfway through the red block on each end to say secure.
2) Use krazy/super/CA glue to glue the blocks down. There is a small indented arrow on each red block to indicate which way faces towards the handle.