Furitek Cayman Pro Wrecker Truck
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Furitek Cayman Pro wrecker truck with man-powered winch.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 145
- Wydruki
- 0
- Wyświetlenia
- 1058
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Furitek Cayman Pro wrecker truck inspired by Matt's Offroad Recovery’s world's biggest offroad wrecker, with man-powered winch.
[Instructions]
1. Slicer setting for winch gears (both L and S), select "concentric" for top/bottom pattern.
2. For the magnetic mount, you need neodymium magnet diameter 13.0mm thickness 2.4mm x 4 (if the size of available magnets are different from this one, you can adjust the step files I uploaded at Thingiverse.)
3. Widen the pulley and stopper holes with a 2 mm drill bit.
4. M2 bolts and nuts are needed to install following parts;
Pulley L: 14mm M2 bolt and nut
Pulley S: 10mm M2 bolt and nut
Stopper L: 10mm M2 bolt and nut
Stopper S: 6mm M2 bolt
Stanchion: 4mm M2 bolt to tie off the end of the crane wire
5. For the crane wire, use thin, strong wire like that used for beadwork.