Furitek Cayman Pro Wrecker Truck
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Furitek Cayman Pro wrecker truck with man-powered winch.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 145
- Makes
- 0
- Views
- 1,058
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Furitek Cayman Pro wrecker truck inspired by Matt's Offroad Recovery’s world's biggest offroad wrecker, with man-powered winch.
[Instructions]
1. Slicer setting for winch gears (both L and S), select "concentric" for top/bottom pattern.
2. For the magnetic mount, you need neodymium magnet diameter 13.0mm thickness 2.4mm x 4 (if the size of available magnets are different from this one, you can adjust the step files I uploaded at Thingiverse.)
3. Widen the pulley and stopper holes with a 2 mm drill bit.
4. M2 bolts and nuts are needed to install following parts;
Pulley L: 14mm M2 bolt and nut
Pulley S: 10mm M2 bolt and nut
Stopper L: 10mm M2 bolt and nut
Stopper S: 6mm M2 bolt
Stanchion: 4mm M2 bolt to tie off the end of the crane wire
5. For the crane wire, use thin, strong wire like that used for beadwork.