PRUSAi3 LCD COVER ASSY "MK3S STYLE" FOR REPRAP DISCOUNT FULL GRAPHIC SMART CONTROLLER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I never found a proper cover for my RepRap Discount Full Graphic LCD controller to finish my Prusa i3 DIY.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 152
- Wydruki
- 0
- Wyświetlenia
- 1550
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
I never found a proper cover for my RepRap Discount Full Graphic LCD controller to finish my Prusa i3 DIY. While waiting for my new Prusa Mini+ I decided to make my own version of the Original Prusa MK3S LCD Cover. I have my printer inside an "Ikea Lack" enclosure so putting the LCD in the front position was not an option. I have moved the controller to the left side of the printer.
I have modified the original parts for MK3S LCD Cover, MK3S Supports and MK2S Knob (modified SCAD files included). I have also created a complete new bracket to fit the LCD Assy to the MK2S Y-Axis design of my printer (also SCAD file is included).
The design uses some original prusa MK2S parts as well (6xLCD-Cable-Clip and 1xPSU-Y Part).
Thanks to Prusa Research for open source design of Original Parts!!!
Print instructions
Printing Settings
Rafts:
No
</div>Supports:
No
</div>Resolution:
0.2
</div>Infill:
15%
</div>Filament:
Black, Translucid Orange
</div>
Notes:
</p>
ASSEMBLY INTRUCTIONS:
You will also need:
6 x M3x10 screws
4 x M3 square nuts
2 x M3x25 screws
2 x M3 nuts
0.- Fit PSU-Y Part on Front-Left Y-Corner of the MK2S Y-Axis (you have to dissasembly part of Y-Axis for this. Follow assembly nstructions available at www.prusa3d.com for this). I reccomend to fit the 2 x M3 nuts now below the part as later might be difficult.
1.- Remove embeded supports for clip and sd opening printed with the LCD cover .
2.- Fit supports LCD supports A&B on LCD controller (same as for MK2S-MK3S cover)
3.- Fit assembly on LCD cover and fix with 2 x M3x10 screws.(same as for MK2S-MK3S cover)
4.- Fit 4 x M3 square nuts on LCD supports and fix LCD Assy Bracket with 4 x M3x10 screws
5.- Connect and route lcd cable connectors on bracket as indicated (Use 2 x LCD-Cable-Clips on bracket)
6.- Fix LCD Assy Bracket to PSU-Y Part with.
7.- Route LCD cable along the M10 rod to your control board using the original LCD-Cable-Clips. I used 4 clips here).
8.- Fit Knob to controller.
9.- You are finish! Enjoy!
10.- Any comment, question or doubt please ask!
Note: If you have added any kind of felt, foam or dumper to the Y-Corners of your Y-Axis you will need to add the same thickness (i.e same felt) to the LCD supports.
Post-Printing
Remove embeded supports for clip and sd opening printed with the LCD cover .