Voron 0 printable Modesty Mesh
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The beloved Modesty Mesh by Maple Leaf Makers split into two overlapping parts to allow it to be printed on a Voron 0
- Ocena
- 4,667 / 5
- Polubienia
- 27
- Pobrania
- 157
- Wydruki
- 4
- Wyświetlenia
- 916
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I split the part in two, made the mesh a milimeter thicker and overlapped the two parts to create surface area to apply glue onto (I reccomend superglue gel).
Sadly this erases the customizability of the orignial so i tried to reacreate a similar hexagonal pattern as in the original skirt of the V0. I created this from the original STL in SketchUp Pro. I'll upload the file as well if you want to create your own variation.
I designed it with tolerances of 0.2mm. Supports are needed.
UPDATE:
I thickend the mesh a bit to be a bit less see-through from steep viewing angles (i.e. from the front)
Also added a version with a small cutout for cables to be routed when installing the Daylight- / Rainbow on a Matchstick mod.