1 / 9
Airsoft AUG to M4 Mag Adapter - With replacement mag nozzle — zdjęcie 1
1 / 9

Airsoft AUG to M4 Mag Adapter - With replacement mag nozzle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A reupload of my old model on Thingiverse. This one now has a replaceable magazine nozzle.

Ocena
3,5 / 5
Polubienia
34
Pobrania
331
Wydruki
2
Wyświetlenia
3345
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Now with the replaceable magazine nozzle. Please be careful to download the correct files! All files with “Replaceable” can be used together with the “Replacement mag nozzle” part. The other files are the original from Thingiverse.

 

A crossview of the added feature:

 

 

— MIGRATED FROM MY OLD THINGIVERSE ACCOUNT — 

Had to redesign the whole AUG mag part, and a little of the M4 part! But now it is as close to a "Print and use" design as I can get it!

I will still come with improvements though! I still believe I can get it closer to a "perfect" adapter. But at least now you guys have something usable :-D

And thank all of you that have come with ideas and tips to improve the design! I have made some pretty cool friends after uploading the old files, which weren't really nothing more than Concept files, but people wanted to see it through!

It is designed with a ASG AUG A3 rifle, so if you have trouble with the fit with rifles from other manufactures, pm me or leave a comment and I will see what I can do.

Assembly is shown in the showcase video.

Link to the showcase video https://www.youtube.com/watch?v=V-kUk4bEYwE

Print Settings

Rafts:

No

Supports: 

Yes

Infill:

20% >


 

Notes:

 

You need a fairly large infill percentage for the screw inserts to hold on the "AUG part". Otherwise the screw might tear it away.
 


The AUG\_part.stl and M4\_part.stl needs some supports while the Lock.stl and Pin.stl does not.

M4_part.stl needs to have the lock mount supported, but try not to get the rectangular hole and the spring insert filled with supports.

Custom Section

Stuff you need!

You'll need some screws, and if you would like to make sure it sticks, you can glue the two main peices together.
2 x screws

optional : glue

Custom Section ==============

Some bonus pictures!

I dug out all the print attempts and prototypes of this project, and thought it was fun you set them up side by side.

 

 

Category: Sport & Outdoors

Tagi