Onyx RCR Rear Rack Clamp-Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bar clamp designed to fit the Onyx RCR oem rear cargo rack.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 428
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is one half of a clamp mount for the Onyx RCR electric motorbike's OEM rear cargo rack. It's symmetrical, there's only one model and you can just flip one upside-down for the underside. You will need to print at least two, four recommended. The clamps have through-holes that fit ¼"-20 or M6 hardware for fastening larger objects to the rear rack, like the crate shown in the photos.
Each ***PAIR*** fastens together with:
- 6x M3x18mm machine screws
- 12x M3 washers (optional but recommended
- 6x M3 nuts
- a dab of threadlocker to prevent loosening from vibration
Fasten an object to a complete clamp pair with:
- 2x ¼"-20 x 2" machine screws or bolts
- 4x ¼"-20 washers (optional but recommended)
- 2x ¼"-20 nylon insert nuts
- a dab of threadlocker
(or the M6 equivalents here)
I recommend printing in ABS or ASA. DO NOT print in PLA - the clamping forces will deform the print over time and the clamp will become less secure. PETG might work.