Onyx RCR Rear Rack Clamp-Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bar clamp designed to fit the Onyx RCR oem rear cargo rack.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 33
- Makes
- 0
- Views
- 428
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is one half of a clamp mount for the Onyx RCR electric motorbike's OEM rear cargo rack. It's symmetrical, there's only one model and you can just flip one upside-down for the underside. You will need to print at least two, four recommended. The clamps have through-holes that fit ¼"-20 or M6 hardware for fastening larger objects to the rear rack, like the crate shown in the photos.
Each ***PAIR*** fastens together with:
- 6x M3x18mm machine screws
- 12x M3 washers (optional but recommended
- 6x M3 nuts
- a dab of threadlocker to prevent loosening from vibration
Fasten an object to a complete clamp pair with:
- 2x ¼"-20 x 2" machine screws or bolts
- 4x ¼"-20 washers (optional but recommended)
- 2x ¼"-20 nylon insert nuts
- a dab of threadlocker
(or the M6 equivalents here)
I recommend printing in ABS or ASA. DO NOT print in PLA - the clamping forces will deform the print over time and the clamp will become less secure. PETG might work.