1 / 6
Pop-in-place Balisong/Butterfly Knife
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pop in place balisong knife that works realy well
- Ocena
- 4,75 / 5
- Polubienia
- 95
- Pobrania
- 1761
- Wydruki
- 6
- Wyświetlenia
- 4988
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 6) (Komentarze: 11)Remiksy (0)Kolekcje (81)Powiązane
A pop in place balisong knife that works realy well
Print Settings
Printer Brand:
Ultimaker
Printer:
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
100%
Filament: Ultimaker Base PLA/PETG Black
Notes:
dont print faster than 60mm/s for this model on a standard printer, bambu and ankermake should be fine tho
============= Post-Printing =============
Just remove any excess material on the bottom edge is there is any (elephants foot)
