Curtain Rod Holders for Wooden Dowels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The curtains in my RV needed replacing along with the rod holders. These objects allowed for replacements using dowels.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
My spouse made some curtains and I used wood dowels (1/2"/13mm or 5/8"/16mm depending on the span) along with these holders. The parametric file from the source object was utilized to generate the end and middle supports; the doubled middle supports were created by just duplicating the single middle supports in 3d builder. I used #6 screws to mount the holders to the walls and #4 hardware to secure the dowels to the holders. No screws needed to hold the rods with the middle support pieces and only 1 screw is really needed for the middle supports.
I initially made these out of PLA. They lasted several years but eventually drooped enough that I decided to replace them. Just swapped them all out with ASA copies.