1 / 3
Curtain Rod Holders for Wooden Dowels — image 1
1 / 3

Curtain Rod Holders for Wooden Dowels

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The curtains in my RV needed replacing along with the rod holders. These objects allowed for replacements using dowels.

Rating
0 / 5
Likes
10
Downloads
87
Makes
0
Views
453
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Share Alike

My spouse made some curtains and I used wood dowels (1/2"/13mm or 5/8"/16mm depending on the span) along with these holders.  The parametric file from the source object was utilized to generate the end and middle supports; the doubled middle supports were created by just duplicating the single middle supports in 3d builder.  I used #6 screws to mount the holders to the walls and #4 hardware to secure the dowels to the holders.  No screws needed to hold the rods with the middle support pieces and only 1 screw is really needed for the middle supports.

I initially made these out of PLA.  They lasted several years but eventually drooped enough that I decided to replace them.  Just swapped them all out with ASA copies.  

Tags