1 / 6
Contact lenses gimbal based travel protector dome — zdjęcie 1
1 / 6

Contact lenses gimbal based travel protector dome

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gimbal based travel case/cage for night lenses to keep them upright while cleaning

Ocena
0 / 5
Polubienia
9
Pobrania
20
Wydruki
0
Wyświetlenia
299
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The model consists of 4 files but two of them needed to get printed together aiming for a nice print in place action (green colored elements in the following picture)

so please import “innerHolder.stl” and “midleFrame.stl” as a multi part model into your slicer and print it with maximum precision and lowest layer height (or play around with the tolerances)

the two shells of the dome shall get printed one by one or at least separated on the build plate with facing up threads and more moderate requirements for precision and layer height 

 

 

 

Tagi