Pizza Ring Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ring box that I designed for a friend that is intended to look like a pizza box.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 194
- Wydruki
- 2
- Wyświetlenia
- 852
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
The pin and the bottom box were printed without any need for supports with ~15% infill density and 3 perimeters.
For the text and pizza shape to be cleaner I printed the top with supports and the text facing up from the print bed. It can be printed the other way around with no supports but the surface finish will not be as nice.
I printed without supports in the holes as I find it can be difficult to remove.
The box is held closed by two 6mmx1.75mm magnets that I glued in place.
I have included an exported step model of the assembly I designed in case people want to remix.