amateur payload rocket (Updated)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rocket made to hold small-scale payload such as sensors, battery, RP Pico, MSD slot... (I'm very new to rockets warning)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- GNU General Public License v2.0
Rocket made to lift payloads.
payload Examples:
This is an altitude data logger I made I even made little holes in the cone to make sure to have the same pressure from the outside. I do not recommend doing this if you're new to coding, soldering, and all around that. Just buy consumer measuring products. Make sure it fits inside. It's a small-scale rocket and it was already a challenge to put all the electronics inside that small space.
USED C6-3 MOTOR. WEIGHT OF THE ROCKET + PAYLOAD WAS 110g
Max speed: 334,3 km/h, Max altitude 195,3m. Do not trust me? Look at the graphs.
Do it yourself type of instructions. !WARNING!
First, make sure to have everything for the list below before starting this journey to the skies.
- small parachute for rockets
- small bungee cord, small cord, tiny cords for parachute
- small Tightening tapes
- recovery wadding
- A motor B, C… (Klima C6-3)
- Klima paper tube 35x385mm
Now look at the photos and you will figure it out I never said I would explain every step
! small Bungee cord is connected to a small cord!
