1 / 4
Articulating Raspberry Pi v2 cam with ring light
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry Pi v2 cam with NeoPixel ring light mount for Articulating Raspberry camera mount system
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (21)Powiązane
!ALL PRINT FILES ARE FOR 0,25mm nozzle!
As all parts are held together by friction and tolerances are quite tight, I can't guarantee successful print with 0,4mm nozzle.
Camera mount modeled for use with Raspberry Pi camera V2.
Ring light holder was modeled for NeoPixel 24 RGB LED, Ø65, WS2812B, 5050, 5V, used with WS281xLED Status plugin for OctoPrint.
Diffuser print file have color change at 0,9mm. I used it to print the “wire cover hole” with black filament to reduce any light bleedthrough.