Articulating Raspberry Pi v2 cam with ring light
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.17 – €0.21 net (excluding VAT)
For file: Articulated cam and light_light diffuser_0.25n_0.1mm_PETG_MK3S_16m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.19 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 15.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Raspberry Pi v2 cam with NeoPixel ring light mount for Articulating Raspberry camera mount system
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 33
- Makes
- 0
- Views
- 345
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
!ALL PRINT FILES ARE FOR 0,25mm nozzle!
As all parts are held together by friction and tolerances are quite tight, I can't guarantee successful print with 0,4mm nozzle.
Camera mount modeled for use with Raspberry Pi camera V2.
Ring light holder was modeled for NeoPixel 24 RGB LED, Ø65, WS2812B, 5050, 5V, used with WS281xLED Status plugin for OctoPrint.
Diffuser print file have color change at 0,9mm. I used it to print the “wire cover hole” with black filament to reduce any light bleedthrough.