Shooting target 2 variants
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
What's up this is a target made to be used on airsoft, nerfs, and similar. You can make Plastic or metal variants.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 485
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- GNU General Public License v2.0
How to choose a variant? Simple as from my experience variant 1 the plastic one is made for airsoft (Long range), nerfs, and similar. Gotta point out I've tested it with my AR-15 airsoft gun mid-range on a Prusa PETG target. It's gone… But I did the second variant
Before you even start
Ok before we start you gotta need something like a rod. The diameter of the rod is idk 8mm? Just measure the sizes inside the Prusa slicer it's not that hard. Then 2 bolts and nuts and again measure the sizes inside the Prusa slicer.
I haven't included anything that you can hold the rod onto so you gotta make your own.
variant 1
Just print Clip & Target and assemble it not that hard.
variant 2
You will need a metal plate of 1mm and metal cutters you gotta print Paintjob/cutting outline+holes & Paintjob2 and clipV2 1mm now because I didn't make the thing yet you will need to figure it out yourself but I hope you and I have common sense and make it. Also when you apply the spray paint/primer make sure it's for the surface you are spraying onto.