1 / 3
Spray Grease Straw Overspray Guard for 8mm threaded rods.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's not perfect, but it will help protect from splatter when spraying grease on your threaded rods.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 587
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (37)Powiązane
update: mine popped off after a couple days and wouldnt go back on my straw. I figured it absorbed water or something and expanded. So I scaled it to 102% and it works well.
Put this at the end of your straw and it will help mitigate splatter damage to your printer. Print with TPU or any flexible plastic.