Small Wide Spool for Samples
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small reusable sample spool based on Bambu, nothing more. Compatible with Bambu spool winders. INCOMPATIBLE with AMS!
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I like the design of those Bambu spools and I needed a sample spool that's pretty wide (close to the usual 1kg width). I don't need a normal sized spool for like 100-300g of filament tho, so I've slightly modified this lovely design to be smaller but keep the width.
This will obviously make it INCOMPATIBLE with AMS. But it will still be compatible with Bambu-dedicated spool winders.
It's just meant to be a small wide reusable sample spool, nothing more. It does NOT use the locking shim. My spool locks so tight I have trouble separating the parts, but if your spool is somehow loose, glue it together. But it shouldn't need glue at all. It's meant to be used with spool winding mechanisms since bigger samples are often loosely thrown into a bag and tangled too much to put them on the spool as is. Hence why gluing won't take away functionality.
I made two versions diameter-wise - one smaller by 15mm (bigger) and one smaller by 20mm (smaller) than the original design. Use whichever fits your samples better, the -20mm will probably be less wasteful. The bigger one is quite big.
I've also made a smaller + thinner (44mm inner width) version for those that prefer a thinner spool. It will fit spool winders that allow for 44mm spools. It was made for use with this remix - https://www.printables.com/model/421590-wip-remixed-11t-and-10t-filament-carriage-sled-for
It will go fairly quickly if you use 0.3 layer height and default 15% infill. You won't put enough weight on it to warrant more, but I'd still use 3 perimeters to be on the safe side. I use stock MK4 0.3 settings and up the perimeters to 3.
Print 1 BambulabSpoolNarrowSpoke and 1 BambulabSpoolWideSpoke. Pick the size you want.
Big thanks to AlexMu for including the f3d file in their upload. It made the remixing way easier.
Changelog:
EDIT (12.07.2023): I've added a 44mm inner width version. I've seen a remix of the filament carriage sled for the Bambu Spool Winder that allows to use 44mm spools. So I made a compatible version, as a thinner spool is gonna be very useful to a lot of people.