Ender3 V2/S1 Legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Legs that provide a little more height to the printer for better cooling. They are designed for the original rubber legs
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 666
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Base for original rubber legs on Ender3 V2 printers and all similar printers built with 4040/4020 aluminum profile. It leaves more space under the printer for better cooling. The legs are made for the original rubber legs of the Creality Ender3 printers. The file "Leg-Ender3-V2-S1-FR" is aligned with the printer display. When printing the legs, a prop can be used on one side (shown in the photo), no props are needed for the rest.
Assembly method:
- remove the rubber legs
- the printed parts are mounted in place of the rubber ones
- we install the rubber legs in the concave base of the already installed legs
Added models for Ender 3 S1
The difference is that there are 5 legs from the bottom and an adjustment has been made according to the bottom cover so that they fit better. The installation is the same as described except for the leg which is at the back under the power supply. It should be stuck with double-sided tape.
Materials needed for assembly:
4 pcs. M3x8 Screws Allen Hex Socket Head
4 pcs. T-nuts M3
double-sided tape for Ender3 S1